*Image is a representation of this item. Actual item may vary.
This tool is used for pulling the cross over tubes out of the head of a 5.9 or 6.7 Common Rail Cummins motor. This will allow you to safely pull the tubes out with out nicking or damaging the cross over tubes. The common way of removing the Cummins CR crossover tube is to use a pair of Vise Grips. Sure, it works, but you risk damaging the threads! Wreck one injector tube and you will pay for this tool - the first time!
Removing the connector tube on the Cummins 24v has always been an issue. The injector tube threads are recessed in the head and they are an oddball size so a special tool is required. The threads on the tube are a modified 15MM. No taps exist to make this thread. The thread depth and pitch have to be programmed into a CNC turning center to make the connector tube removal tool.
Tork Teknology specializes in designing and manufacturing tools for the Cummis 5.9 and 6.7 diesel. Tork Teknology makes all of the tools they offer out high quality steel, this allows you to get more use out of your tools and better performance. At Engineered Diesel we use all Tork Teknology tools because of the high quality and the afford ability. If you plan on working on your 5.9 or 6.7 these are tools you will need to get the job done easily and quickly.