*Image is a representation of this item. Actual item may vary.
1 Injector (6 needed per truck)
Add an Install Kit!
6 NEW BOSCH cross over feed tubes
1 CUMMINS OEM intake horn gaskets
Tork Tool Feed Tube Removal Tool
OEM FEED TUBES - It is highly recommended to replace the connector tube at the time of injector replacement. If an old connector tube is re-used, it can introduce debris into the system or a repeat leakage failure can occur, damaging the body of the new injector (which is not a warrantable failure).
**WARRANTY: 1yr/unlimited mileage warranty, unless otherwise specified. Covers manufacturer defects and faulty workmanship. DOES NOT COVER FAILURE DUE TO DEBRIS IN THE INJECTOR, BAD FUEL, DIRTY INSTALL, FAILED FEED TUBES, ETC. ALSO NOT COVERED: damage due to water, gasoline, or other contaminants in the fuel. Operating any injector on any fuel other than commercially available petroleum diesel including biodiesel and any homemade blends may result in jeopardizing the warranty. If the injectors are being replaced due to contaminated fuel, the feed tubes must be replaced. All customers are highly advised to use Stanadyne performance formula diesel fuel additive!**
US Orders: Core charge will be refunded if core is returned within 30 days of ship date.
CANADIAN Orders: Core charge will be refunded if core is returned within 60 days of ship date.
8566 Lake Michigan Dr
Allendale, Mi 49401
Your product wil be shipped to you after we receive your cores.
Drain as much fluid as possible. Package your core so as to prevent puncture of packaging.
Engineered Diesel, UPS, Fed Ex, and the US Postal Service will NOT tolerate fluid contamination of other packages.
*THE SENDER WILL BE LIABLE FOR DAMAGES, FREIGHT, AND/OR LOST CORE DEPOSITS CAUSED BY IMPROPER PACKAGING*